Collection: Heat Transfer Vinyl

HTV transfers are more forgiving and can go on a variety of material/fabrics such as 100% cotton, 100% polyester, and cotton/poly blends as well as a variety of colors! HTV transfers are printed using a commercial printer utilizing Eco-Solvent inks. These are for clothing/fabric only and are not intended to be used with cups/wood/etc.

HTV transfers come already weeded. Some designs may come with a small white border depending on how detailed the design can be. Please let me know if this will be an issue before purchase.

HTV transfers do require a transfer tape to be used and at least one sheet will come for every THREE transfers as it is re-usable! The transfer tape will be cut to accommodate the sizes ordered. I've gotten up to seven uses out of one piece before it lost the tact. When you get your transfer, drop the transfer tape onto the transfer and rub, working from middle out to get any air bubbles out. Peel the back carrier sheet away and you’re ready to press. I also recommend using a heat press with these transfers to ensure the correct pressure is being used.

Before pressing your transfer, preheat your garment for 3-5 seconds at 315°F. Place your already masked transfer onto your garment and press for 315° for 15 seconds with medium pressure. Peel the carrier sheet while hot, but slowly.

Care Instructions: Wait 24 hours before washing. Wash inside out using mild detergent. Do not bleach. Do not dry clean. Tumble dry low or hang to dry.